Elumatec AKS 134 Notching saw

Category:

Description

GENERATE PDF

elumatec_Notching_saw_AKS_134-00

NOTCHING SAW AKS 134/00

Description

  • Variable notching possibilities for mullion and transom combinations, e.g. for curtain walls, conservatories, sky lights, and special designs
  • Precise and safe notching is ensured because the workpiece is fixed and only the saw units move
  • Both saw units are adjusted in height simultaneously by means of a hand wheel (analogue display on the hand wheel)
  • The cutting depth is set using an analogue display
  • Manual angle adjustment of the saw blades using a digital display of the tilting angles
  • Support table with compound slide and pivoting back fence is manually adjustable for optimal use of the cutting range
  • The angle of the pivoting back fence is shown on a digital display
  • Horizontal and vertical profile clamping
  • Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles)
  • Hydro-pneumatic saw feed

Technical specifications

Lower saw unit (vertical):

  • Saw blade diameter 550 mm
  • Tilting range from 45° forwards to 60° towards the rear
  • Max. cutting height of 210 mm
  • Power supply 230/400 V, 3~, 50 Hz
  • Power output 3 kW with motor brake
  • Saw blade speed 2,800 rpm
  • Manual tilting angle adjustment with digital display (standard)

Upper saw unit (horizontal):

  • Saw blade diameter 500 mm
  • Tilting range from 55° downwards up to 60° upwards
  • Notching depth, max. 190 mm
  • Power supply 230/400 V, 3~, 50 Hz
  • Power output 3 kW with motor brake
  • Saw blade speed 2,800 rpm
  • Manual tilting angle adjustment with digital display (standard)
  • Travel 830 mm max.

Support table with working height of 990 mm:

  • Pivoting range from 30° left to 30° right, home position 0°
  • Pivoting range manual with digital display
  • Compressed air supply 7 bar
  • Air consumption per working cycle 35 l without spraying, 45 l with spraying
  • Length 3,000 mm, depth 1,420 mm, height 1,600 mm, weight 1,250 kg

 

NOTCHING SAW AKS 134/10
See AKS 134/00, however:

  • Equipped with a 4-axis controller for automatic adjustment of the horizontal and vertical saw blades for angle cutting, as well as for height adjustment and notching depth
  • Values from design drawings can be entered directly via the keyboard

Options

  • Laser indicator for cutting line
  • Noise protection package
  • Saw blades
  • High performance cutting fluid

Reviews

There are no reviews yet.

Be the first to review “Elumatec AKS 134 Notching saw”